Industrial Valves Market By Product Type (Gate Valves, Butterfly Valves, Ball Valves, Globe Valves, Check Valves, Plug Valves, Diaphragm Valves, Others), Material Type (Cast Iron, Steel, Alloy, Brass, Stainless Steel, Plastic, Others), End-User Industry (Oil & Gas, Chemical & Petrochemical, Water & Wastewater Treatment, Power Generation, Food & Beverage, Pharmaceutical, Building & Construction, Others), Valve Size (Up to 2 inches, 2 to 6 inches, 6 to 20 inches, Above 20 inches) & Region - Forecast to 2023-2033
Category: Industrial Equipment Published Date : Jun-23 ID: CVC-78891 Format: PDF Pages: 300
Report Highlights According to a research survey conducted by ChemView Consulting, the Industrial Valves Market was worth US$ 75.8 Bn. The market is expected to grow at a CAGR of 4.6% between the 2023 and 2033 to reach US$ 118.9 Bn.
Research Scope/Taxonomy:
Key Companies Profiled:
1.1. Global Market Snapshot
1.2. Key Success Factors
1.3. Strategic Analysis and Recommendations
2.1. Market Taxonomy
2.2. Market Definitions
3.1. Preliminary Investigation & Research Design
3.2. Secondary Research & Primary Research
3.3. Data Analysis & Econometric Modelling
3.4. Expert Data Validation
4.1. Supply-Side Trends
4.2. Demand-Side Trends
5.1. Global Market Value (US$ Mn) Analysis, 2017 – 2032
5.2. Incremental $ Opportunity Index, 2022-2032
5.3. Global Market Volume (Tons) Analysis, 2017 – 2032
6.1. Regional Level Pricing Analysis and Forecast
6.1.1. Manufacturers Level Pricing
6.1.2. Distributor Level Pricing
6.2. Global Pricing Analysis Benchmark
6.3. Cost Breakdown Analysis
7.1. Cross Analysis of Material TypeW.R.T. Product Type
8.1. Regional Supply Vs. Demand Gap Assessment
8.2. Top Producing Countries Analysis
9.1. Macroeconomic Factors
9.2. Forecast Factors
9.3. Market Dynamics
9.3.1. Driver
9.3.2. Restraint
9.3.3. Opportunity
9.4. Supply Chain Analysis
9.4.1. List Raw Material Suppliers
9.4.2. List of Manufacturers
9.4.3. List of Distributors
9.4.4. List of End-Users
9.4.5. End-Users Consumption Analysis
9.4.6. Average Profitability Margin Analysis
9.5. Covid-19 Impact Assessment
9.5.1. Economy/Cluster Projections
9.5.2. Covid-19 Economic Assessment
9.5.3. Impact on Target Market
9.5.4. Recovery Scenario
9.6. Regulatory Framework
9.6.1. Regulations of Key Countries
9.6.2. Potential Impact of Regulations
9.7. Porter’s Five Forces Analysis
9.8. Technology Landscape
10.1. Introduction
10.2. Key Market Trends
10.3. Historical and Current Market (2017-2021) and Future Market Analysis (2022-2032) By Product Type [Value (US$ Mn) and Volume (Tons) Analysis]
10.3.1. Gate Valves
10.3.2. Butterfly Valves
10.3.3. Ball Valves
10.3.4. Globe Valves
10.3.5. Check Valves
10.3.6. Plug Valves
10.3.7. Diaphragm Valves
10.3.8. Others
10.4. Market Attractiveness Analysis by Product Type
11.1. Introduction
11.2. Historical and Current Market (2017-2021) and Future Market Analysis (2022-2032) By Material Type[Value (US$ Mn) and Volume (Tons) Analysis]
11.2.1. Cast Iron
11.2.2. Steel
11.2.3. Alloy
11.2.4. Brass
11.2.5. Stainless Steel
11.2.6. Plastic
11.2.7. Others
11.3. Market Attractiveness Analysis by Material Type
12.1. Introduction
12.2. Historical and Current Market (2017-2021) and Future Market Analysis (2022-2032) By End-User Industry [Value (US$ Mn) and Volume (Tons) Analysis]
12.2.1. Oil & Gas
12.2.2. Chemical & Petrochemical
12.2.3. Water & Wastewater Treatment
12.2.4. Power Generation
12.2.5. Food & Beverage
12.2.6. Pharmaceutical
12.2.7. Building & Construction
12.2.8. Others
12.3. Market Attractiveness Analysis by End-User Industry
13.1. Introduction
13.2. Historical and Current Market (2017-2021) and Future Market Analysis (2022-2032) By Valve Size [Value (US$ Mn) and Volume (Tons) Analysis]
13.2.1. Up to 2 inches
13.2.2. 2 to 6 inches
13.2.3. 6 to 20 inches
13.2.4. Above 20 inches
13.3. Market Attractiveness Analysis by Valve Size
14.1. Introduction
14.2. Key Market Trends
14.3. Historical and Current Market (2017-2021) and Future Market Analysis (2022-2032) By Region [Value (US$ Mn) and Volume (Tons) Analysis]
14.3.1. North America
14.3.2. Latin America
14.3.3. Europe
14.3.4. Asia-Pacific
14.3.5. Middle East
14.3.6. Africa
14.4. Market Attractiveness Analysis by Region
15.1. Introduction
15.2. Key Market Trends
15.3. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
15.3.1. By Country
15.3.1.1. U.S.
15.3.1.2. Canada
15.3.2. By Product Type
15.3.3. By Material Type
15.3.4. By End-User Industry
15.3.5. By Valve Size
15.4. Market Attractiveness Analysis
15.4.1. By Country
15.4.2. By Product Type
15.4.3. By Material Type
15.4.4. By End-User Industry
15.4.5. By Valve Size
16.1. Introduction
16.2. Key Market Trends
16.3. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
16.3.1. By Country
16.3.1.1. Brazil
16.3.1.2. Mexico
16.3.1.3. Rest of Latin America
16.3.2. By Product Type
16.3.3. By Material Type
16.3.4. By End-User Industry
16.3.5. By Valve Size
16.4. Market Attractiveness Analysis
16.4.1. By Country
16.4.2. By Product Type
16.4.3. By Material Type
16.4.4. By End-User Industry
16.4.5. By Valve Size
17.1. Introduction
17.2. Key Market Trends
17.3. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
17.3.1. By Country
17.3.1.1. Germany
17.3.1.2. Italy
17.3.1.3. France
17.3.1.4. UK
17.3.1.5. Spain
17.3.1.6. Netherlands
17.3.1.7. Norway
17.3.1.8. Russia
17.3.1.9. Rest of Europe
17.3.2. By Product Type
17.3.3. By Material Type
17.3.4. By End-User Industry
17.3.5. By Valve Size
17.4. Market Attractiveness Analysis
17.4.1. By Country
17.4.2. By Product Type
17.4.3. By Material Type
17.4.4. By End-User Industry
17.4.5. By Application
17.4.6. By Product Type
17.4.7. By Valve Size
18.1. Introduction
18.2. Key Market Trends
18.3. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
18.3.1. By Country
18.3.1.1. China
18.3.1.2. Japan
18.3.1.3. South Korea
18.3.1.4. India
18.3.1.5. Indonesia
18.3.1.6. Thailand
18.3.1.7. Vietnam
18.3.1.8. Australia & New Zealand
18.3.1.9. Rest of Asia-Pacific
18.3.2. By Product Type
18.3.3. By Material Type
18.3.4. By End-User Industry
18.3.5. By Valve Size
18.4. Market Attractiveness Analysis
18.4.1. By Country
18.4.2. By Product Type
18.4.3. By Material Type
18.4.4. By End-User Industry
18.4.5. By Valve Size
19.1. Introduction
19.2. Key Market Trends
19.3. Pricing Analysis
19.4. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
19.4.1. By Country
19.4.1.1. Saudi Arabia
19.4.1.2. Turkey
19.4.1.3. U.A.E.
19.4.1.4. Rest of the Middle East
19.4.2. By Product Type
19.4.3. By Material Type
19.4.4. By End-User Industry
19.4.5. By Valve Size
19.5. Market Attractiveness Analysis
19.5.1. By Country
19.5.2. By Product Type
19.5.3. By Material Type
19.5.4. By End-User Industry
19.5.5. By Valve Size
20.1. Introduction
20.2. Key Market Trends
20.3. Pricing Analysis
20.4. Historical and Current Market Size (2017-2021) and Future Market Size Analysis (2022-2032) [Value (US$ Mn) and Volume (Tons) Analysis]
20.4.1. By Country
20.4.1.1. South Africa
20.4.1.2. Nigeria
20.4.1.3. Egypt
20.4.1.4. Rest of Africa
20.4.2. By Product Type
20.4.3. By Material Type
20.4.4. By End-User Industry
20.4.5. By Valve Size
20.5. Market Attractiveness Analysis
20.5.1. By Country
20.5.2. By Product Type
20.5.3. By Material Type
20.5.4. By End-User Industry
20.5.5. By Valve Size
21.1. Tier Structure Breakdown
21.2. Market Share Analysis
21.3. Production Capacity Analysis
21.4. Company Footprint Analysis
21.4.1. Product Footprint of Players
21.4.2. Regional Footprint of Players
21.4.3. Channel Footprint of Players
21.5. Brand Preference Analysis
21.6. Competition Dashboard
22.1. Emerson Electric Co.
22.1.1. Company Overview
22.1.2. Product & Financial Portfolio
22.1.3. Manufacturing Facilities
22.1.4. Recent Developments
22.1.5. SWOT Analysis
22.1.6. Strategy Overview
22.2. Flowserve Corporation
22.3. Crane Co.
22.4. AVK Holding A/S
22.5. IMI plc
22.6. KITZ Corporation
22.7. Cameron International Corporation
22.8. Spirax-Sarco Engineering plc
22.9. Pentair plc
22.10. Tyco International Ltd.
22.11. Watts Water Technologies, Inc.
22.12. Danfoss A/S
22.13. Alfa Laval AB
22.14. GEMU Group
22.15. KSB SE & Co. KGaA
22.16. ITT Inc.
22.17. Schlumberger Limited
22.18. Velan Inc.
22.19. Swagelok Company
22.20. Samson AG